Pages

Monday, October 8, 2018

SYNTHESIS OF TRIETHYL ORTHOFORMATE (Triethoxymethane)



CAUTION: This experiment should be conducted in an efficient fume cupboard.

  • Fit a 1500-ml round-bottomed flask with a large double surface reflux condenser. 
  • Make sure that the apparatus is thoroughly dry. 
  • Place 750 ml of super-dry ethanol and 123 g (82 ml, 1.03 mol) of dry chloroform (CAUTION) in the flask. 
  • Add 52 g (2.25 mol) of clean sodium, cut into small pieces, through the condenser in the course of 30 minutes; when the reaction becomes vigorous, cool the outside of the flask by running water from the condenser outlet. 
  • When all the sodium has reacted and the mixture has attained room temperature, filter off the sodium chloride through a sintered glass funnel. 
  • The filtration apparatus must be thoroughly dry, and a drying tube, filled with granular calcium chloride, should be placed between the filter flask and the pump. 
  • Wash the solid on the filter with 50 ml of absolute ethanol and allow the washings to run into the main filtrate. 
  • Distil the solution from a water bath through an efficient fractionating column in order to recover the excess of chloroform and most of the alcohol; collect the distillate (about 500 g) (A) in a filter flask protected by a drying tube. 
  • Decant the liquid remaining in the flask from a little salt which has separated, and distil it through an all-glass Dufton (or Widmer) column. 
  • A fraction (B) of low boiling point passes over first, followed by the triethyl orthoformate at 144-146 °C. The yield is 35 g (23%) but depends somewhat upon the efficiency of the fractionation.
  • Carry out a second run with the recovered chloroform-alcohol mixture (A): add 100 g of dry chloroform and sufficient super-dry ethanol (200-250 ml) to give a total volume of 750 ml. 
  • Add 52 g of sodium as before. 
  • Remove the excess of chloroform and alcohol as before on a water bath through a fractionating column, add the intermediate fraction (B) from the first run, and fractionate again. The yield of product, b.p. 144-146 °C is 45 g (29%), p.m.r. spectrum (CC1 4 , TMS) S 1. 1 9 (t, 9H), 3.52 (q, 6H) and 5.00 (<5, 1 H).






No comments:

Post a Comment

We specialize in producing high value chemicals. Besides our regular products, we strive to develop new products based on customer’s requirements. Our R&D center plays crucial role in handling complex chemistries and developing newer technologies. We respect intellectual property rights and have confidentiality agreement with various multi national companies. We undertake contract manufacturing of fine chemicals and advance intermediates of API’s.